So my kitchen pull out faucet head has developed a super annoying side spray somehow. Any suggestion on a possible fix or whether I can order the parts to fix this?
EDIT: no clog, the side spray is due to a hole or puncture.
Hi try opening up the head and replacing the rubber bit or just cut that rubber bit off see if it solves the problem
Try and rub your finger over it like you’re washing a plate. Not too hard but hard enough to clean it. It could just be a little build up from hard water. You might be able to stick something small in the hole to clean it too. Just don’t cut the rubber doing so.
I have well water 🙄 and have issues with buildup. I usually tie a baggie filled with vinegar around it and let soak overnight. Works for me
Fill a baggie with vinegar n tie it around the faucet n let it sit for an hour or so
Scratch that rubber piece with your fingernail. If it’s build up, you’ll knock it off, quickest fix
What is the brand? Most faucets have a lifetime warranty and will replace the parts. If you are not the original owner, don’t tell them! Just say you can’t find the paperwork.
Not my proudest fix, but struggled to get parts during lockdown, so “its on the list” as I keep telling my wife
A mix of apple cider vinegar and soda. Put in a baggie or bowl and place faucet in to soak. It will be all fixed 😄
It looks like the rubber jet has a slit or hole in it.
See if you can get a new one from the manufacturer or if you don’t want to bother, you can cut it off.
Hard to tell but did the tiny rubber nozzle move out of place? Mine on my shower head do the sometimes and I just use my fingernail to push it back